Article [13] ST1300 - Tip over bars on the CHEAP

MoDZuki said:
Theres loads on EBAY - I got mine 2 weeks ago for 25 bucks and 25 to ship to me in Canada..I'll post the link - they had a pile of them take offs from Wing conversions to trikes.. The user name is honda11racing , the guys name is Tim phone number 419-331-2333 Great to deal with and not a mark on my guards- brand new!
Click to expand...

Awsome, I will take a look. Thanks.
 
Tell him Dave Yates sent u!... I was really happy to get mine.. shipped immediately and took it to the post office personally- Great stuff!
 
Dduelin; Any where I can find pics of the ones where they got the holes to line up. i would rather go that way if I can.
 
They are the same thing.. what he did was open the holes to fit 10mm bolts (use 10x1.25x50mm long) The bars need to be squeezed so the bars flex and the holes line up. the OP of that thread used a vice and band clamps to kep then squeezed while they were bolted in place! Cheers Dave
 
They are the same thing.. what he did was open the holes to fit 10mm bolts (use 10x1.25x50mm long) The bars need to be squeezed so the bars flex and the holes line up. the OP of that thread used a vice and band clamps to kep then squeezed while they were bolted in place!   Cheers Dave the tread is here https://www.st-owners.com/forums/showthread.php?132655-Saddlebag-protection-bars By the way
 
The bolt is 10mm, not the head .

Length can be 40-50 mm

I found 50 wasn't too long and Dave found 40 wasn't too short .
 
v8-7 said:
The bolt is 10mm, not the head .

Length can be 40-50 mm

I found 50 wasn't too long and Dave found 40 wasn't too short .
Click to expand...
I bought 50mm and also 60mm full thread - I have a machine shop in my basement - so easy to modify and/or cut down. I am working on an add on plate that will make mounting these a snap with no welding or painting- just bolt on. I'll post as soon as work allows me to do it..
 
i remove the stock bolt and when i try to purchase a similar ones at my local screw store...its not easy to find. where can i purchase these size 10x1.25x50mm long...they mentioned to me these is finethread type of screw bolt.
 
Check other stores???

I found them at 70mm long with full thread at a local farm store known as Rural King.
I haven;t found them in stainless yet, well not in the states.

Check Ace Hardware or Tru-Value.
Lowes and Home Depot most likely won't.
 
paneuro said:
i remove the stock bolt and when i try to purchase a similar ones at my local screw store...its not easy to find. where can i purchase these size 10x1.25x50mm long...they mentioned to me these is finethread type of screw bolt.
Click to expand...

I bought them at Lowe's or Ace Hardware.
 
You must log in or register to reply here.
Back
Top Bottom