What brand and part number for the turn signal and brake? LED flasher as in when you apply the brake it blinks a few times before staying on?I installed LED turn signal bulbs, tail light bulbs, and a LED flasher yesterday. Seams to be a lot brighter, especially after I cleaned the tail light lens.
You didn't spend an hour cutting the little mold tits off the tire before riding it?Finally got the new wheels and tires on, after hitting that chunk of concrete at 60+ mph and breaking both of my wheels, and took for a short ride down the street to check the brakes and forks.. all seems fine. Now to gear up and take it for a longer ride and scuff off the tire mold tits off the tire..... !!!!!!!!!! T
You guys out on the far west coast sure do have some funny riding methods. Must be all that fresh air.
IMPELLER, WATER PUMP
No....you are the only one, I know, who does that.....You didn't spend an hour cutting the little mold tits off the tire before riding it?
While that's a great farkle where tolerated by constabulary it more likely an LED flasher module to replace the factory turn signal flasher.
I just brought the post up with the part numbers. St1300 turn signal bulbs. The flasher works the same as the stock one just it's made for led bulbs.
No....you are the only one, I know, who does that.....
Had to remove the rear shock to adjust and remembered to do up the lower bolt first. It's easier to do that end first....
Having only 3 bars on the gas gauge helps me as does 42psi in both tires. I haven't done one up yet but a 1" board can be a big help. Roll the rear tire onto the board and it's much easier to put it on the center stand.
I've read about that tech for years. The lights are supposed to look solid or have a slight twinkle when viewed head on. But when the light falls within someone's peripheral vision it's supposed to really get their attention. That's their answer to the question "what good is any light if somebody's not looking at it?"
