What did you do with your ST1100/ST1300 today?

What shield do you have on the bike?
It's a Clearview windshield - it measure about 21.5 inches from top to bottom. I purchased it back around 2001 / 2002 - not sure if the company still makes them. I'm very happy with the size of this windshield because it's tall enough to send the air blast over the top of my head, but short enough that I easily see over the top of it all the time, rather than looking through it (I'm 5'10" tall).

Below is a picture taken long ago that shows the Clearview windshield laid on top of the OEM Honda windshield. In addition to the height increase, there is also a substantial increase in width. If it's raining hard and I am travelling at highway speeds, I stay pretty dry. I chose the lightly smoked version rather than the clear version because the light smoke tint hides scratches much better than a totally transparent windshield.

Michael

Clearview Windshield - 21.5 inch height
DSC03098.jpg
 
Sold my ST today. Yes I’ll miss her but didn’t ride it much after getting a wing. Lots of good memories and in 78,000 miles of smiles and never missed a beat!!! So long Black Magic!!
 
Sold my ST today. Yes I’ll miss her but didn’t ride it much after getting a wing. Lots of good memories and in 78,000 miles of smiles and never missed a beat!!! So long Black Magic!!
It's always sad to see an ST going away for the last time.
I can fully understand with the Wing getting all the miles.
 
Sold my ST today. Yes I’ll miss her but didn’t ride it much after getting a wing. Lots of good memories and in 78,000 miles of smiles and never missed a beat!!! So long Black Magic!!
At least you're still in the Honda family:cool:
 
Got my JIS bits-kit from gofastinnovations today. Nice stuff. Along with that Vessel ball driver and its bits I'm pretty well kitted. I just need the #2 stubby.
 
Using LED modules for turn signals will cause them to flash at a faster than normal rate due to a difference in loading that the original incandescent turn signal relay was designed for. There are PnP relays that will rectify this issue.

- Remove the back-right most relay thats labelled “Turn” in the manual image below
2E7BC80B-21BB-414A-A561-815EA88974B9.jpeg

LED relay replacement
0DC2121A-5EE8-4830-A649-DCB20C94AD72.jpeg

Three pronged connector is the one you want
807E6A06-5D7F-437D-B61E-3B1CE6FFF468.jpeg

I unplugged the original turn relay, and left it there. Then plugged in the LED relay and stuffed it near the others such that it wont rattle around
A987A43D-87AB-4669-89C2-7AC5FAD7D4AF.jpeg

Test both turn signals and flashers; then put bike back together
 
Last edited:
Went to my kids highschool parking lot after hours and practiced u-turning. Getting better at it, but not as good as the pros yet.

Also testing new Sena Prism Tube WiFi helmet cam.
5BA7B233-24B0-41C9-AC13-0159A7251A04.png
What is that reflecting off the inside of your windshield? Is that a “HUD” device?
 
It's a Clearview windshield - it measure about 21.5 inches from top to bottom. I purchased it back around 2001 / 2002 - not sure if the company still makes them. I'm very happy with the size of this windshield because it's tall enough to send the air blast over the top of my head, but short enough that I easily see over the top of it all the time, rather than looking through it (I'm 5'10" tall).

Below is a picture taken long ago that shows the Clearview windshield laid on top of the OEM Honda windshield. In addition to the height increase, there is also a substantial increase in width. If it's raining hard and I am travelling at highway speeds, I stay pretty dry. I chose the lightly smoked version rather than the clear version because the light smoke tint hides scratches much better than a totally transparent windshield.

Michael

Clearview Windshield - 21.5 inch height
DSC03098.jpg
Thanks much !
 
Back
Top Bottom