Article [13] ST1300 - TupperWare Worksheet

[CYYJ]

Thanks Kevin, much appreciated.

Michael

 

[beeker]

Just printed for my first ever tppwr removal. Many thanks!

 

[Tdinova]

Click on the link below. All 4 are the same number part # 29 CLIP, SPLASH SHIELD 90657-SB0-003

http://www.hondaparts-direct.com/fi...=Motorcycles&make=Honda&year=2012&fveh=225588

I done searches on the 2012 and my 2007 and some of the rivets/push pins are different. So the worksheet is good for the year it was made for. I had to modify it my match my '07. I hope this helps.

 

[geoqwest]

First of all, many thanks to John for creating these excellent worksheets, and thanks to Mellow for hosting them.

I am a bit perplexed about holes present on the underside of my motorcycle, at the very front, just inches behind the front wheel. The Tupperware worksheet identifies the push-rivets that go into three of the four holes (the forward-most three), but does not mention what goes into the aft-most hole that I have called out on the photo below.

Can anyone help identify what type of fastener is used in the aft-most hole? Is it possible that Honda made a production change (I have a 2012 model)?

Michael

From the looks of your profile photo, it would have been easier to work on this issue at the time of the pic

 

[tworrs]

Re: TupperWare Worksheet

John, you are a Prince among men!
Garry

 

[Eagleavn]

Re: TupperWare Worksheet

Awesome idea....

 

[GOF54]

Re: TupperWare Worksheet

Many thanks John,
I have only had my 2004 ST1300 for a month here in Australia.
Poking around and found your wonderful piece of work.
GOF54
OZSTOC

 

[Oldbikefixr]

Excellent work aid. Well prepared and presented.

 

[RockyHayes]

Hello All - wondering if anyone has developed a complete replacement order form of all the plastic fasteners. I have disassembled my 2003, and about 70% of the fasteners disintegrated. Any assistance would be enormously appreciated!!

 

[Soontobeone]

Note, I have labeled some of the socket bolts as 5mm or 6mm

FYI, I have a 2007 ST1300, and all of the socket bolts are 5mm. I don't have any 6mm head bolts holding any of the tuperware on.

 

[ToddC]

Hello All - wondering if anyone has developed a complete replacement order form of all the plastic fasteners. I have disassembled my 2003, and about 70% of the fasteners disintegrated. Any assistance would be enormously appreciated!!

Check your local Cycle Gear Shop or e-bay. much cheaper than factory

ToddC

 

[Sundayride]

Re: TupperWare Worksheet

Thanks so much. Outstanding job.

 

[Rustybill]

Re: TupperWare Worksheet

Awesome stuff! Thanks a mil

 

[gmgrant59]

Very helpful ! Thanks for putting that together.

 

[Jay51]

Awesome Chart!

 

[SupraSabre]

Dang, talk about taking all the mystery out of it and making some of us sound like "X-perts"!

 

[JMartin]

This is Brilliant!
Just wish I had one for my F6B.

Jim

 

[VeloNige]

Re: TupperWare Worksheet

John, you are a diamond geezer! I am new to Pan European ownership and am finding this forum really useful and I love the worksheets you've produced. A man after my own heart.
Cheers!

 

[teetoms1]

Re: TupperWare Worksheet

Now I find this thread, took everything off and back on with only 2 leftover pins...lol. This blog is the best.

 

[Savago]

Awesome! Used it this last weekend to remove the lower cowling for an oil change and it was really helpful!