My ST1100 is very, very sensitive to the slightest incline from level ground when checking the oil level..... and if you run it, it takes way longer than a few minutes to settle out again....
Best to check cold before turning the engine over at all, on a spirit level checked surface........ or, do an oil change and put 3.6 litres in.. yes it should be 3.7 with a filter change, but I did that and suffered a weird vibration that only subsided when I took a few hundred ml's out..... go figure....
Mine works best when just above the low level line, no more than half way between the two lines is fine..... but if the bike is tilted at all..... it will vary...
Apart from that, great bike!
Best to check cold before turning the engine over at all, on a spirit level checked surface........ or, do an oil change and put 3.6 litres in.. yes it should be 3.7 with a filter change, but I did that and suffered a weird vibration that only subsided when I took a few hundred ml's out..... go figure....
Mine works best when just above the low level line, no more than half way between the two lines is fine..... but if the bike is tilted at all..... it will vary...
Apart from that, great bike!