Old Enough To Remember?

We were so poor ,that for Christmas my mum cut the pockets out of our pants so we could have something to play with.
Ha..!!!!
That was my dad's line. Except it was a new pair of overalls........
 
WOW Uncle Phill! I used to go to the local slot car track about 4 or 5 days a week 1964-1966 (used up all my paper route and grass cut money!) I would rewind the cox and classic motors with what I think it was #24 or 28 wire, cover windings with epoxy then balance armature with a file while it was sitting on two single edge razor blades that had been leveled in a vice with a carpenters level and polish contacts with crumpled grocery bags. Masking tape behind magnets to move them closer to the armature helped a lot also. Did very well in races, took all winnings in parts instead of track time! finally won a "Globe Screamer" (Boy that was fast) motor and shortly after track closed.o_O {EDIT these were using 1/32 and or 1/24 scale bodies.
 
We had two different places that had 8-lane tracks, with colored seating stations that matched the lane colors. Each station had a 3-wire 1/4" jack and three posts for alligator clips for the controller.

The tracks both had an over-and-under configuration, a long straight-a-way, and a very high banked turn. One of them also had a scale-sized 1/4 mile two-lane drag strip.

I remember the hot setup was a car with the pickup hinged at the rear of the chassis, so you wouldn't lose power or hop out of your slot when you accelerated real hard.
 
Back
Top Bottom