Givi E55 w/admore light kit instructions?

[Frenchie]

Hi guys,
I recently purchased a GIVI E55 Maxia tech with the Admore light kit. I am wondering if anyone has previously installed one of these topcases and have any detailed installation instructions. I am not sure if Admore color coding will be the same as my 2009 ST1300A.

Does anyone have a wiring schematic which is readible to coordinate the wiring.
Also do I need to pull out the black box (past the ruber band out).

Thanks!

 

[Silver]

Mine is a V46 with Admore light kit for running & turn signals. It's easier than it looks.

The kit comes with quick connectors which work well to tap into the wires under the seat, The five wire harness from Admore connected to the following colored wires on my '07:

Harness color Blue to tail light wire Blue/Brown
Harness color Red to brake light wire Green/Yellow
Harness color Green to Right turn signal wire Light Blue
Harness color Yellow to Left turn signal wire Orange
Harness color Black to Ground

Good luck and Enjoy!

Dan

 

[Frenchie]

Hi Dan, did you have to remove the computer box to gain access to the wires?
I found a video through Twisted throttle which they mention to pull the rubber band and pull the cpu box to tie in the two wires to the side then it splits into three wires.
I pulled the elastic with great difficulty without breaking it and can not seem to pull out the cpu box without disconnecting the three connectors.
Argh!