Error Code 26

[Willsmotorcycle]

If it requires @Igofar on the line, it is probably at a "Three Beards" difficulty level. Way above what I should try to tackle. But I'll have a look at it anyway,

Anything there you can operate by hand or the only way to work it is by getting the bike through a few starting cycles?

Thank you.

It wasn't a thing, you'll be fine.

 

[Larry Fine]

But after about 2000 miles, it is slowly becoming less smooth again. Possibly from ECU long term fuel trim routines.

Are you using premium or regular fuel?

 

[MidLife]

Are you using premium or regular fuel?

It's been mainly Shell V-Power® NiTRO+ with the occasional Buc-ee's premium ethanol free.

 

[Larry Fine]

It's been mainly Shell V-Power® NiTRO+ . . .

Is that a premium?

 

[Igofar]

If it requires @Igofar on the line, it is probably at a "Three Beards" difficulty level. Way above what I should try to tackle. But I'll have a look at it anyway,

Anything there you can operate by hand or the only way to work it is by getting the bike through a few starting cycles?

Thank you.

Piece of cake, I can walk you through it with minimal difficulty.

 

[MidLife]

Is that a premium?

Maybe......

Shell V-Power® NiTRO+ premium gasoline | Shell USA, Inc.

Give your car the fuel it deserves with Shell V-Power® NiTRO+ Premium Gasoline, which removes up to 100% of performance-robbing deposits in your engine.

www.shell.us

 

[MidLife]

Piece of cake, I can walk you through it with minimal difficulty.

Great. Thanks, Probably need to check the 5-Way T and synchronize the Starter Valves at the same time. Weather is too good right now to pass on riding so wrenching will wait for a little while. So far the 3000 RPM climb is only first thing in the morning. 1500 RPM on restarts the rest of the day. Probably confirming something is binding.

 

[Zen Motorcycle Training]

Hi. I’m having this code 26 Knock sensor problem. There’s continuity from plug to ecu. I’ve replaced the knock sensors. Still get the fault!!
The right plug fell apart but the connector still fits the plug. Does it need the plastic surround?
Cheers for any info