Error Code 2

[Vagabond327]

Hi All! Started my ST1300 today for the first time since last fall and the FI light came on showing a Code 2 error. Bike was in the garage during some construction works this winter and there was a lot of dust. I wonder if this can be related? I tried to reset the code following the procedure found in the forum with the jumper but keeps coming back. Starts normally and FI indicator is not flashing. It starts flashing as soon as the engine start to rev a little faster during warm up. Doesn’t go away after. Thanks in advance for your help and I wish you all a great motorcycle season!

 

[MidLife]

Hi All! Started my ST1300 today for the first time since last fall and the FI light came on showing a Code 2 error. Bike was in the garage during some construction works this winter and there was a lot of dust. I wonder if this can be related? I tried to reset the code following the procedure found in the forum with the jumper but keeps coming back. Starts normally and FI indicator is not flashing. It starts flashing as soon as the engine start to rev a little faster during warm up. Doesn’t go away after. Thanks in advance for your help and I wish you all a great motorcycle season!

Often is a plugged up five-way Tee (vacuum hose issue).

Article [13] - ST1300 - FI Codes (MIL) Malfunction Indicator Lamp | ST1300 Articles

The PGM-FI MIL denotes the failure codes (the number of blinks from 0 thru 33). When the indicator lights for 1.3 seconds it is equivalent to 10 blinks. When more than one failure occurs, the MIL shows the blinks in order of lowest to highest number. Code Reset: Turn the engine stop switch...

www.st-owners.com