Looking for this grommet for the “air cleaner housing”
- Thread starter lance1586
- Start date
Thanks I figure this one being oval wouldn’t be available at the hardware or parts store.
Sadlsor
Site Supporter
Someone here recently posted the same issue with the same grommet, and his workaround.
Sadly, my failing memory does not retain random factoids and points of interest as it did years ago, maybe some more astute members can fill in the void.
But yes, auto parts stores and maybe the box hardware stores will have a similar item. It's basically an oval o-ring, with a slit around the inside center.
Sadly, my failing memory does not retain random factoids and points of interest as it did years ago, maybe some more astute members can fill in the void.
But yes, auto parts stores and maybe the box hardware stores will have a similar item. It's basically an oval o-ring, with a slit around the inside center.
rubber is soft it will conform to the hole
John OoSTerhuis
Life Is Good!
Last edited:
Those grommets are used by everybody...I think. I have them on all three of my Kawasakis and I am betting they can be had by some of the aftermarket plastic suppliers
Thank you! I bought the carburetor couplings for my 1100 from them and they’re really nice Japanese aftermarket replacements btw and were cheap like $40 for set.
I bought some of those on ebay for a yamaha tank, but years ago.
I don't see ST1100 listed for fit unless I missed it. Let us know.
Dang Amazon ca. Wants 16 dollars for a grommet. Johns link way better.