1300 electrical

I had read st13fundred?s article on installing a Centech AP-2 fuze block and liked his concept. I opted to use one of crazykz?s FZ-1 Fuze Blocks. I cut the mount out of a piece of 1/16? Aluminum plate and used stainless steel M8 button head bolts, nuts and washers all from ACE hardware. The...

I had purchased two on/off/on rocker switches with LED illumination from Eastern Beaver. The first switch will be used with my Hella FF50 lights. The first On position will be always on and the second On position will be connected to a relay and be on only when the high-beam headlights are on...

There is a location on the ST1300 that is great for a switched power tap in case you just have a couple things to power or you need a switched tap for your fuse box. Below are the steps to get to the power location: Remove left saddlebag and left side panel to expose the OEM fusebox...

I have used the Add On digital voltmeter before and it's a nice product that provides for a clean installation. I purchased this at www.cyclemaxohio.com for under $30 shipped. Here are some pics of the meter, it measures 1 1⁄4" X 7/8": Step 1 Decide location - I wanted to put my meter...

If you are interested in installing a back-lit, Gold Wing switch to control the Audiovox cruise control, this may be helpful. The Excel spreadsheet contains the wiring harness color codes and operation for the ST, Gold Wing switch, and Audiovox. The ST colors are applicable for the 2004 ABS...

The Definitive Quartet Harness Farkle Wiring Guide "How to power your first farkle" I wrote this because there's always a lot of questions about wiring farkles and the quartet harness. Hopefully this will provide a starting point for most. If you need to get power to a device on your ST1300...

Hi All, I've seen some powerlet installs and a couple things that come up in them are what is the measurements to drill the hole and does it clear the coil. Anyone that has done it knows that it does clear the coil but it isn't obvious from any of the pictures I've seen. So in order to clear...

Disclaimer This document is provided strictly for entertainment purposes. Information in this document does not replace, enhance, or supersede information contained in Honda Owner's Manuals, Service Manuals, or other Honda publications. The contents of this document should not be considered...

To view this article, click on the link to the attached PDF file.. Scans of the original Honda supplied installation instructions, mastered by BeBeep, are also included.

I'd been looking for a good setup to get power into my top box for accessory charging. When travelling, I like to keep my camcorder, cell phone and digital camera charged up. Powerlet had the perfect setup. About half way down the web page it shows the setup for the ST1300. It is on order...