STumped
Because I usually am . . . .
Let's try this again, had a problem with images in first post.
Ok, these are various ST1300 that i have accumulated over the years. Another member posted a thread looking for windshields and I sent him this information. He offered to buy four of the windshields but then backed out when he saw how much shipping was to him. Shipping can be pretty pricey, mainly for the size, especially the farther away you are from me. When the dimensions exceed a certain point (can't recall exactly what point) they use "dimensional weight". For example, the four screens he had selected, boxed up, came to 17.5 pounds but the "dimensional weight" based on size was 46 pounds, and that is what was used to calculate shipping charges.
Anyway, since I had gone through all the time and effort to send him all this information I figured I would put it to good use here in case anyone else might be interested so here we go........
These fist two are OEM screens that I experimented with by cutting them down for more airflow. The one on the left is 16" tall and the one on the right with the more rounded corners is 17" tall at the center. $25 each.
Next is a HUGE Cee Bailey screen with vent. It is 26" tall and 25.5" at widest point. $50
Next is an Ermax screen (I never heard of the brand either). 24" tall and 26.5" at widest point. $50
Next are two Rifle screens. Rifle screens use their own angled mounting blocks that give their windshield a little more rake (rearward angle) than other screens. I have one pair of mounting blocks (seen at the bottom between the two screens) for both screens so this would have to sell as a set. The larger one is 24.5" tall and the shorter one (cut down by me) 14.5" tall. Both are 22" at the widest point. $60 for the set.
Lastly is an OEM screen in excellent condition and a Laminar Lip combo. The lip attaches with 3M Dual Lock discs that are very strong and hold the lip to the OEM screen. I attached two sets of the Dual Lock discs to the OEM screen so there is some flexibility with how high the lip is mounted. You can ride with or without the lip. Since those discs are permanently mounted to the OEM screen this is a set only. $80 for the set.
Well, there you have it. I can ship them in the least costly manner and combine shipping if you want multiple screens, but shipping is likely to be pricey, mainly for their size.
Feel free to ask any questions and thanks for looking.
Ok, these are various ST1300 that i have accumulated over the years. Another member posted a thread looking for windshields and I sent him this information. He offered to buy four of the windshields but then backed out when he saw how much shipping was to him. Shipping can be pretty pricey, mainly for the size, especially the farther away you are from me. When the dimensions exceed a certain point (can't recall exactly what point) they use "dimensional weight". For example, the four screens he had selected, boxed up, came to 17.5 pounds but the "dimensional weight" based on size was 46 pounds, and that is what was used to calculate shipping charges.
Anyway, since I had gone through all the time and effort to send him all this information I figured I would put it to good use here in case anyone else might be interested so here we go........
These fist two are OEM screens that I experimented with by cutting them down for more airflow. The one on the left is 16" tall and the one on the right with the more rounded corners is 17" tall at the center. $25 each.
Next is a HUGE Cee Bailey screen with vent. It is 26" tall and 25.5" at widest point. $50
Next is an Ermax screen (I never heard of the brand either). 24" tall and 26.5" at widest point. $50
Next are two Rifle screens. Rifle screens use their own angled mounting blocks that give their windshield a little more rake (rearward angle) than other screens. I have one pair of mounting blocks (seen at the bottom between the two screens) for both screens so this would have to sell as a set. The larger one is 24.5" tall and the shorter one (cut down by me) 14.5" tall. Both are 22" at the widest point. $60 for the set.
Lastly is an OEM screen in excellent condition and a Laminar Lip combo. The lip attaches with 3M Dual Lock discs that are very strong and hold the lip to the OEM screen. I attached two sets of the Dual Lock discs to the OEM screen so there is some flexibility with how high the lip is mounted. You can ride with or without the lip. Since those discs are permanently mounted to the OEM screen this is a set only. $80 for the set.
Well, there you have it. I can ship them in the least costly manner and combine shipping if you want multiple screens, but shipping is likely to be pricey, mainly for their size.
Feel free to ask any questions and thanks for looking.
