What 1100 screen is this?

Tgorman

Joined
Feb 18, 2007
Messages
13
Location
Richmond,VA
STOC #
6519
I would like to add a laminar lip to my screen but when I view the pics on the Laminar site for the stock screen it doesn't look like mine. http://www.laminarlip.com/st1100.php

I called California sport touring to inquire as to why the Laminar lip shown installed on the 1100 in their ad didn't match mine. They questioned if this was a stock screen. My bike came from Canada. It's a 1999ABSII. It says Honda at the bottom of the screen.

Also, does the other screen installed on my bike look like a Rifle to those of you who may know? I think it would be perfect with a lip but I may need to order the lip for a Rifle and not stock. I know the stock lip will work on a Clearview shield.


https://www.st-owners.com/pp_gallery/showphoto.php?photo=2411&cat=recent&limit=recent

https://www.st-owners.com/pp_gallery/showphoto.php?photo=2408&cat=recent&limit=recent
 
Last edited:
The link to the Laminer site has several pics. The third one is an old-style Honda shield, before they put cat-eye vents in.

I'm confused, are the gallery pics your bike and shield?

The first gallery link, with the cat-eye vents, looks like it's probably a stock Honda shield. If this is what yours looks like, you're ok buying the lip that fits the stock shield.

The second gallery pic looks like a Givi to me, but I'm not familiar with the Rifle, so I could be wrong. Is there no manufacturer information molded in near the edge of the shield? When I had a Givi there was a Givi logo molded in, so if you don't have that it probably isn't one.

If your pics are too big to upload, use a photo editing program to downsize them. If you don't have one, use Google's free Picassa program:

http://picasa.google.com/
 
OK, after looking at the pics again, and comparing your 'shield to the Rifle, I don't think you have a rifle. The one on your bike seems far more vertical than the Rifle shield.

But I went and looked at some picture of the Givi, and I don't think you have one of those, either.

I've found the folks at Laminar to be very helpful. I'd suggest contacting them and asking if they recognize the 'shield, and have a lip they can recommend.
 
That does not look like a Rifle. I have a Rifle on mine. It looks very similar to one, however. The biggest difference between the Rifle and your screen is that the Rifle always has the black strip around the bottom of the screen like a OEM shield (and it's not easy to take off without scratching the heck out of the shield). See picture:
Photo0023.jpg
 
Tgorman: The shield in your pictures looks like a stock Honda ST1100 shield, to which someone has added edging. Laminar sells just the Lip, for that shield, it used to be about $75.
 
You must log in or register to reply here.
Back
Top Bottom