24-pin loom connector front left side?

[canada_67]

Morning fellow STOwners/STFans...

Does anyone happen to have details of the 24-pin connector as shown in photo/diagrams below? I'm after ideally make/series/type and/or pin types for the connector.








I've had a good trawl around t'Internet to no avail (yet).

Cheers n'beers....

 

[The Dan]

https://www.digikey.com/

Here is a good place to start looking. or try here.

Amazon.com

 

[Al st1100]

Morning fellow STOwners/STFans...

Does anyone happen to have details of the 24-pin connector as shown in photo/diagrams below? I'm after ideally make/series/type and/or pin types for the connector.








I've had a good trawl around t'Internet to no avail (yet).

Cheers n'beers....

Is that grease of corrosion ? It's hard to tell from the picture but corrosion is usually green.

 

[ST1100Y]

Is that grease of corrosion ? It's hard to tell from the picture but corrosion is usually green.

Looks like the notorious "white grease" Honda smears on all and everything nowadays...
Its intended to keep water out, but I'm unsure about its electrical conductivity, possible that it actually increases the resistance of contact surfaces there...

 

[canada_67]

https://www.digikey.com/

Here is a good place to start looking. or try here.

Amazon.com

I've looked at both - no joy so far....

 

[Andrew Shadow]

I've looked at both - no joy so far....

I'm not sure if you are looking for the connector or are only looking for information about the connector and terminals.
If you are looking to buy one try Cycle Terminal. If you don't see it on his website contact them- Joe is a pretty good guy to deal with.
If you are only looking for information I have no idea how much time he would be willing to spend with no possibility of a sale as I have never done that with him.

 

[STRider]

I've looked at both - no joy so far....

Do tell. What has you so interested in this particular connector?

Is something amiss or do you have a project planned using circuits which pass through that connector?

 

[canada_67]

Do tell. What has you so interested in this particular connector?

Is something amiss or do you have a project planned using circuits which pass through that connector?

Oh, I plan to install the electric windshield on my ST1300-3 and thinking about following the OEM wiring as closely as possible, including adding terminals/wires to that connector... I am a bit a*al about that kind of thing but it's not essential as can always but a separate 4-way to accommodate the 3 wires needed.

Have managed to identify most of the other connector types, this one has eluded me so far!!

 

[canada_67]

I'm not sure if you are looking for the connector or are only looking for information about the connector and terminals.
If you are looking to buy one try Cycle Terminal. If you don't see it on his website contact them- Joe is a pretty good guy to deal with.
If you are only looking for information I have no idea how much time he would be willing to spend with no possibility of a sale as I have never done that with him.

Good shout, will have a look there... I'm just after the crimp terminals but def looking to purchase... have used CT before.