1300 bearings

A PDF file to describe how to fit a pair of bearings into a wheel of the ST1300. It is straight forward, but if you don't know the correct procedure, there is a good chance of getting it wrong. This pdf explains what things could go wrong, and how to avoid them. A quick rundown and a few...

Front Wheel Bearing Removal Note the 'official' Honda tools - but other methods work just as well. Small taps work best for me. Larger ones knock the tool straight out of the bearing. -------------------------------------------- Front Wheel Bearing Installation Note that for the second...

Recently tore into my '04 with the intention of installing the Race Tech fork kit (valves, adjustable caps, springs) and also consider putting in the tapered steering head bearing set I bought earlier this year from CBR when I also purchased both wheel sets. So far now have installed the rear...

So my bike is getting on higher in mileage, and I think its time I replace the bearings (probably this winter) ... just over 90k on the original bearings and nothing seems wrong with them just think it'd be prudent. The point of the post is to find out from you guru's if I've got everything I...

Please: This is my first try at this, those with more experience please chime in with your tips and tricks that might help make this a better procedure. Rear Flange Bearing RR Step 1 Remove Ring - This is pretty simple, some needle nose pliers will work, the ring does not have a lot of...

Checking your Drive Flange Bearings on your ST1300 Here is a pictorial for checking your Drive Flange Bearings on your ST1300. Photo 1 Ice pick method to remove large Snap Ring. Photo 2 Screwdriver method to remove large Snap Ring. Photo 3 Snap Ring pliers is the preferred method for removal...