changed throttlebody looking for some in sight

[flick250]

I changed my throttle body because the coating was gone now I have no spark checked all the electrical connectors they are clean seen no pins pushed in running out of ideas any help would be appreciated I had spark before I changed the throttle body

 

[woodybelle]

Maybe check fuse D and L for starters.

 

[flick250]

Maybe check fuse D and L for starters.

Ill look

 

[Andrew Shadow]

Maybe you mixed up a couple of connectors.
If you did, a no start condition is the result.
See below.

I been watch'n too much You Tube............ | ST1300 Related

For a while now I've been thinking about coast-to-coast touring. I realized, although I'm a Merchant Marine, meaning not a bad mechanic, I haven't much of a clue about wiring harnesses/switches or the mechanicals of the ST. So, I picked up a 2003 barn find to jump right into it. On the way...

www.st-owners.com

 

[Igofar]

Check your map sensor switch connector, is it blue? If so, you swapped it with the wrong one.
The grey one should be at map sensor.
The one in this picture is incorrect, and the reason he has no spark.